Well-being programmes for your Zapper according to Dr. Clark, Dr. Rife, Dr. Beck and HP Baklayan New programmes: Crystal Diamond Shield Relaxation Well-being GoldenStream Innovations integrated in the included standard programmes and in the Diamond Shield Chipcard programmes: Memory function Autostart function with or without signal tone Key lock Sweep Micro currents (up to 0.1 volts) Constant current control Modulation: from 2 to 254 times modulation Pulse discharge (grounding) by impulse setting and discharging into the earth, the effectiveness of all programmes is increased 3-fold. (utility model protection pending) Diamond Shield: The protective shield for your well-being Regulation, harmonisation, activation of all meridians in 8 minutes From the predecessor programmes, all frequencies have been modulated, thus increasing their effectiveness. Harmonious vibrations according to Baklayan Relaxation and well-being on all levels Scope of delivery Diamond Shield Crystal Zapper IE EMS Metal wrist cuffs Electrode cable 2 adhesive electrodes 80 x 45 mm Earthing cable (plug type F, "Schuko") Socket tester 9V block battery and charger Plastic case Electrode belt for use with the Crystal programme

The basic model Well-being programmes according to Dr. Clark, Dr. Rife, Dr. Beck and HP Baklayan This product is the Diamond Shield Zapper IE EMS with grounding cable. You can find all detailed information about the Diamond Shield Zapper IE EMS here! Included in delivery: 15 standard programmes Discharge function Harmonic oscillations according to Baklayan In addition, the zapper can be upgraded at any time by means of chipcards according to the desired areas of application. For some applications, ready-programmed chipcards are available as accessories. For reasons of advertising law, we are obliged to make the following statement: We distance ourselves from any healing claims or promises. The products serve the general well-being and can have a supporting effect. All statements are within the meaning of the Heilmittelwerbegesetz (German Drug Advertising Act). Possible effects and effects of use are purely empirical claims which have not been scientifically proven. Scope of delivery: Diamond Shield Zapper IE EMS Metal wrist cuffs Electrode cable 2 adhesive electrodes 80x45 mm 9V block battery Plastic case Earthing cable Socket tester

The frequency device for programming for professionals easy Zapper operation Operating modes in the basic Zapper equipment: Well-being programmes according to Dr Clark, Dr Rife, Dr Beck and HP Baklayan e.g.:Diamond Shield -I mpulse discharge Waveform: Rectangle Positive offset Microcurrents Sweep, adjust sweep time Modulate -I mpulse discharge Simultaneous modulation and sweep Simultaneous modulation, sweeping and pulse discharge Harmonic oscillations according to Baklayan including ChipCard TOP 121 Frequencies can be played from ChipCard Frequencies can be entered and programmed on individual chip cards Chip-Cards with different indications available Saving of the tested frequencies on ChipCard with the Diamond Shield Professional specific bio-frequencies are stored on a ChipCard this ChipCard with its individual programme can be used at home with the Diamond Shield Zapper IE EMS ChipCards can be reprogrammed as often as desired Pre-programmed ChipCards: ChipCards are available with a wide variety of pre-programmed frequency sequences For reasons of advertising law, we are obliged to provide the following information: We distance ourselves from any healing claims or promises. The products serve the general well-being and can have a supporting effect. All statements are within the meaning of the Heilmittelwerbegesetz (German Drug Advertising Act). Possible effects and effects of the application are purely empirical statements which have not been scientifically proven. Scope of delivery Diamond Shield IE EMS Professional Metal wrist cuffs -Electrode cable -2 Adhesive electrodes 80 x 45 mm Earthing cable Socket tester 9V block battery Charger Plastic case TOP121 database chip card 2x Master Universal Chipcard Frequency Guide II

Double cable for Diamond Shield incl. push button adapter For Diamond Shield Zapper The cable connects the two wrist cuff or adhesive electrodes to the zapper. (see illustration) Push button adapter: 2x10mm 2x04mm

single 10mm for cuffs

single 4mm for

for practical use directly on the body Radius of approx. 1 m around the device Frequency spectrum up to 1 gigahertz 24 application programmes battery-operated simple operation e-Relief mini reproduces some of the most important components of natural environmental radiation in order to balance the body's vital field in general and thus make it easier to deal with technical radiation. 1. Natural radiation versus technical radiation This topic is not only very important, but also widely and publicly discussed (often peppered with misleading or false information) . Unfortunately, we cannot go into it adequately here and will limit ourselves to the basic facts. If you would like to read more about it , we recommend the book:Tatort Zelle. In nature, a broad spectrum of electromagnetic radiation is generated that is beneficial or even indispensable for life on earth. There are many indications that the natural environmental radiation in which the biological organisms on Earth have developed over millions of years is of considerable importance for the energy balance of all living beings. So-called technical radiation (electrosmog) , on the other hand, is a "new invention" for our bodies. On the one hand, it has not yet had the time to adapt evolutionarily, and on the other hand, its bandwidth is very limited (i.e. comparatively only a few frequencies at the same time) and not only affects it for a long time, but also relatively rigidly and intensively. 2. The key lies in the spectrum Natural environmental radiation ranges from less than 1 hertz to 320 gigahertz, including the infrared radiation above this, visible and UV light as well as X-rays and gamma radiation. Our bodies have had eons of time to adapt to this enormous bandwidth with its rhythms . However, the organism has not only adapted, but has also developed important natural processes of high dynamics, bandwidth and rhythmic variety. It therefore perceives them as positive and beneficial - even at higher intensities - and uses them for its survival and regeneration. The technical radiation developed for our modern way of life, which has become increasingly present in recent decades, pursues completely different goals. It is therefore limited to a considerably smaller frequency range and is so much more intense that it can affect and disrupt our physical processes right down to the DNA. 3. Summary It is probably quite unrealistic to prevent all technical radiation. The trend is obviously in the other direction. Nevertheless, it can be concluded that environmental radiation created for the body, which is more similar to natural conditions, can relieve it and support it in its regeneration . The more of these factors can be reproduced at the same time , the more attractive and easier it is for the vital field of the cells to regenerate and restore its very own order. It can stabilise and strengthen itself against new disruptive influences. Following the development of a device for the area for this purpose in 2017, the e-Relief, , the desire arose among users for another small device that could be worn on the body at all times. That's why we launched the e-Relief mini in 2019. 4. A little jack-of-all-trades e-Relief mini reproduces some of the most important components of natural ambient radiation (within a radius of 1 m in all directions). It can generate different broadband signals up to around 1 gigahertz. It thus generates Schumann waves of the first 11 modes (which well covers these special frequencies naturally generated in the earth's atmosphere), and other frequency patterns such as fractal frequency spectra, broadband spectra and substance spectra in certain frequency ranges. 5. Easy to use, self-explanatory The 24 programmes are self-explanatory and can be selected via the menu.Simply hang around or plug in.

Electrode gel 250ml

Electric cable made of electrically conductive rubber that is harmless to health. This rubber makes it possible to attach electrodes to various parts of the body. For example, electrodes can be attached to the body with a bandage or a rubber band with a Velcro fastener. If electrically conductive gel is used, the pulse transmission effect with these electrodes is perfect.

Electrode Belt Diamond Shield Crystal Zapper Size: L | 105 - 120 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode belt Diamond Shield Crystal Zapper Size: M | 90 - 110 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode belt Diamond Shield Crystal Zapper Size: S | 85 - 100 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode belt Diamond Shield Crystal Zapper Size: Super L | 130 - 150 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode belt Diamond Shield Crystal Zapper Size: XL | 110 - 130 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode belt Diamond Shield Crystal Zapper Size: XS | 70 - 90 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

Electrode Belt Diamond Shield Crystal Zapper Size: XXL | 120 - 140 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.

for Diamond Shield Zapper IE EMS and Professional IE EMS For the newly developed important impulse discharge (IE) function of the Diamond Shield Zapper IE EMS, the plug can be plugged into an earthed socket. The plastic housing of the plug only makes contact with the earth. The white pins are also made of non-conductive material. They are only used to ensure that the plug fits snugly. After using the programme, it is recommended to stay earthed for another 50 minutes. The zapper can be switched off for this purpose. The plug complies with German standards (Schuko plug, plug type F).

Fusselektroden Set kompatibel fürSuper Ravo Zapper, Biozapper, BiotrohnFlachelektroden aus lebensmittelechtem Stahl.Anwendungsmöglichkeiten:Einzeln als FußelektrodenKombiniert mit den Handelektroden (4 Punkt - Auflage)Größe: 12x 30cm pro Elektrode

Increase effectiveness by 300   For two decades, Hp Baklayan has been researching an improvement in electric frequency application (the zapper). His Diamond Shield Zapper IE with automated pulse discharge, modulation, and sweep technology has a tremendous technological edge to this day and has long since established itself as a standard device for connoisseurs.   Tesla technology and free energy transfer The idea of "free energy transfer" by means of Tesla technologies fascinated him ever since he first heard about it. Earlier experiments showed hardly any results, since Tesla coils are always effective only for a very small frequency range. But inspired by the topic of "fractal antennas", he came up with the idea of combining them with the zapper's electric current as well.   Fractals By using more than 1200 fractals arranged as Tesla coils, Hp Baklayan was able to develop an amplifier that covers all frequency ranges well.The results were more than impressive from the first attempt.

The F-SCAN4 offers the widest range of functions in our product family. With the colour screen, combined with an optimised operating concept, all possibilities for frequency application are available. With the optionally available ChipCard, programmes can be transferred to the F-SCAN COMPACT, for example. The F-SCAN3 is extremely easy to operate and is ideal for continuous use. Version The F-SCAN4 is fully equipped including USB connection and requires no further accessories for operation. For trained users who have mastered the EAP function, the EAP option is available and can be purchased separately. The built-in rechargeable battery enables mains-independent operation for 4-6 hours. Multifunction output, broadband output and PowerPort are available as outputs. The battery is charged via the USB cable supplied with a charger. Features Adjustable signal strength for sine and square wave OSCA - the new standard for current control DIRP for standard scans SUB SCAN mode for specific scans Advanced functions: up to 6 parameters can be assigned to a frequency: Waveform selectable (sine, square, full wave, smart) WOBBLE with adjustable wobble - range ENVELOPE (envelope function) TIMER - function Graphic colour screen with touch sensitive surface (Touch Screen) Frequency selection Complete memory management with large integrated memory Zoom adjustment for graphic DIRP analysis Universal output (multiplex) switchable: Sine for 0.01 Hz to 3 MHz , DC-OFFSET at multifunction output Sine 0.01 Hz to 15 MHz at wideband output Square wave for 0.01 Hz to 100 kHz with adjustable signal strength, FULL WAVE at multifunction output Square wave for 0.01 Hz to 100 kHz with adjustable signal strength, DC-OFFSET at the multifunction output SMART waveform for increased efficiency Separate broadband output for working in the megahertz range up to 15 MHz at 5Vpp (volt-peak-peak) PowerPort simultaneously available at own connection Creation of tables with 460 entries possible. Optionally available EAP function. Special features Output: The waveform can be selected as desired for each programmed frequency. There is no need for tedious plugging. Parallel use of the frequencies on the PowerPort or on the WIDE output is possible... Operating concept: By selecting one of the main menus, the functions and settings offered there can be easily recognised and, if necessary, changed by touch. The unit supports the preparation of common applications through factory presets and is thus quickly ready for use. Dimensions 205 mm x 140 mm x 30 mm. LCD: VGA 800 * 480 pixels. The SMART signal form combines the main wave with a high frequency and thus serves to increase efficiency. The use of the standard ChipCard serves for the convenient exchange of applications with F-SCAN COMPACT devices. The broadband output enables analysis and application in the megahertz range. The use of the ChipCard PLUS serves for the exchange of data between F-SCAN MOBILE and F-SCAN3 devices. OSCA the new standard OSCA is the abbreviation for "Output Signal Control Algorithm" and is used for constant current control according to a specially developed algorithm. This method was specially developed by TB-Electronics. The output signal is controlled and displayed in real time according to requirements. The very sensitive procedure measures currents in the microampere range and regulates the output voltage according to the set waveform and impedance. Electrical currents generated by frequency generators are load dependent (load is what is connected to the output). The "load" does not behave linearly, but constantly changes its characteristics depending on frequency, waveform and signal strength. Through OSCA and precise current control, higher efficiency of the application is achieved because the influence of the load is constantly compensated. OSCA is introduced for the first time with the F-SCAN4. Settings "OFF", "SENSITIVE", "STANDARD" and "HIGH" are possible. If OSCA="OFF" is selected, the current regulator is deactivated and a constant output voltage can be set as before. The combination of DIRP (scanning by feedback) and OSCA is unique and serves for further optimisation. Scope of delivery F SCAN4 F-SCAN4 USB charger FTB224 USB cable FTB223 Electrodes chrome steel 2 sets of adhesive electrodes FTB041 Connection cable FTB308 Finger probe FTB303 Instructions for use FSLIT106 Carrying case FTB333

The F SCAN MOBILE NT is the convenient link between the F-SCAN COMPACT and the F-SCAN3. The coloured screen with touch-sensitive surface replaces a keyboard. Settings are made and functions triggered by touching a symbol on the screen with the operating pen. Operation is easy to learn. Product features Fast response to operator commands DIRP analysis function with graphical display of results Multi-signal output for sine, square and smart curve Additional power output for driving lamps or magnets Adjustment control for square wave signal strength Memory with capacity for 100 data sets, each with up to 50 frequencies, the associated parameters and any DIRP analysis results obtained Special functions selectable: SENSITIVITY, WOBBLE, SWEEP Frequency range and step size adjustable for DIRP and SWEEP Frequency range of the sine signals 0.01 Hz to 3 MHz Frequency range of the square-wave signals 0.01 Hz to 100 kHz Timer adjustable per frequency Tables with up to 460 entries can be created. Special features Multi-signal output: All signal forms are output at one output of the unit. The unit automatically switches internally to the sine or square waveform depending on the frequency. Below 65'000Hz square wave, above sine wave. However, the user can manually assign one of the available waveforms to each frequency. The SMART signal form combines the main wave with a high frequency and thus serves to increase efficiency. The use of the standard ChipCard serves the convenient exchange of applications with F-SCAN COMPACT devices. The use of the ChipCard PLUS serves the exchange of data between F-SCAN MOBILE NT and F-SCAN3 devices. Screen and comfort By selecting one of the menus, the functions and settings offered there can be easily recognised and, if necessary, changed by touch. The unit supports the preparation of common applications through factory presets, making it quickly ready for use. Dimensions 138mm x 90mm x 27mm. Screen VGA 480 * 272 pixels. Scope of delivery F-SCAN MOBILE NT F-SCAN MOBILE NT USB charger FTB224 USB connection cable FTB223 Hand electrodes chrome steel FTB202A Connection cable FTB308 Two sets of adhesive electrodes FTB041 Finger probe FTB303 Instruction manual FSLIT102 Carrying case FTB325 FTB129 F-SCAN MOBILE NT

Foot tracers for BioZapper

Handelektroden für Super-Ravo-ZapperBiozapperBiotrohn

Hand electrode (stainless steel - 1 pair)