BioZapper
Our bestseller is the BioZapper. Identical in construction to the Super Ravo Zapper, it is the ideal device for ambitious private users as well as for professional use. In addition to the more than 1,500 standard programmes, we offer software extensions for the BioZapper on an ongoing basis. The DNA frequency database is also available as an extension for the BioZapper.
Super Ravo Zapper
In addition to its 1,500 programme lists on the software, the Super Ravo Zapper is characterised by its excellent quality and stability. The device and software are ideally suited for continuous professional use.
Diamond Shield Zapper
The Diamond Shield Zapper device series is ideal for private users. Everything is easy to use and pre-programmed. Insert the frequency programme in the form of a chip into the device, switch it on and get started.
Healing practitioner Alan E. Baklayan is constantly continuing his research so that the extensive range of chip cards is constantly being expanded.
miniZap
A zapper (especially the Beck zapper or blood zapper) energises the body by means of weak alternating currents via the skin and strengthens its ability to perform and regenerate on a bioelectrical level. Users report a spontaneous increase in energy and general well-being. The application is completely harmless and can be carried out by anyone without hesitation. Lasting results can be seen after just a few days to weeks.
F-Scan Zapper
F-Scan devices are characterised by the DIRP function. The DIRP function includes an automatic resonance analysis so that the frequencies that are currently important to you are analysed and automatically integrated into the programme sequence.
VEGET Zapper
The VEGETMED/HARMONY is a frequency generator with integrated Tesla coil technology that can be used to treat both acute and chronic pain.
This form of pain treatment is called TENS. The current flow generated by the VEGETMED/HARMONY, which flows through the adhesive electrodes attached to the body, stimulates the tissue and blocks the transmission of the pain impulse.
What should I consider when buying a zapper?
- Don't just compare the price, but also the accessories included and the possible functions! Various additional functions or devices are often included. For example, some devices not only allow you to select frequencies, but also certain standard programmes. Others offer extensive frequency databases for download. So compare carefully what you get for your money!
- Before buying, think carefully about which applications you want to use the zapper for. Most of them can be used very extensively. Nevertheless, they differ slightly in the options available to you or your clients.
- Wristbands have the great advantage that they can also be connected to the feet. This is not possible with hand electrodes. Conversely, many users find the hand electrodes more comfortable.
How does a zapper work
Can I carry out frequency therapy myself with the zapper?
Electric cable made of electrically conductive rubber that is harmless to health. This rubber makes it possible to attach electrodes to various parts of the body. For example, electrodes can be attached to the body with a bandage or a rubber band with a Velcro fastener. If electrically conductive gel is used, the pulse transmission effect with these electrodes is perfect.
Electrode Belt Diamond Shield Crystal Zapper Size: L | 105 - 120 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode belt Diamond Shield Crystal Zapper Size: M | 90 - 110 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode belt Diamond Shield Crystal Zapper Size: S | 85 - 100 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode belt Diamond Shield Crystal Zapper Size: Super L | 130 - 150 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode belt Diamond Shield Crystal Zapper Size: XL | 110 - 130 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode belt Diamond Shield Crystal Zapper Size: XS | 70 - 90 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
Electrode Belt Diamond Shield Crystal Zapper Size: XXL | 120 - 140 cm Only for the Diamond Shield Crystal programme, which is pre-programmed on the Diamond Shield Crystal Zapper and available as a Crystal ChipCard for the Diamond Shield Zapper.
for Diamond Shield Zapper IE EMS and Professional IE EMS For the newly developed important impulse discharge (IE) function of the Diamond Shield Zapper IE EMS, the plug can be plugged into an earthed socket. The plastic housing of the plug only makes contact with the earth. The white pins are also made of non-conductive material. They are only used to ensure that the plug fits snugly. After using the programme, it is recommended to stay earthed for another 50 minutes. The zapper can be switched off for this purpose. The plug complies with German standards (Schuko plug, plug type F).
Fusselektroden Set kompatibel fürSuper Ravo Zapper, Biozapper, BiotrohnFlachelektroden aus lebensmittelechtem Stahl.Anwendungsmöglichkeiten:Einzeln als FußelektrodenKombiniert mit den Handelektroden (4 Punkt - Auflage)Größe: 12x 30cm pro Elektrode
Increase effectiveness by 300 For two decades, Hp Baklayan has been researching an improvement in electric frequency application (the zapper). His Diamond Shield Zapper IE with automated pulse discharge, modulation, and sweep technology has a tremendous technological edge to this day and has long since established itself as a standard device for connoisseurs. Tesla technology and free energy transfer The idea of "free energy transfer" by means of Tesla technologies fascinated him ever since he first heard about it. Earlier experiments showed hardly any results, since Tesla coils are always effective only for a very small frequency range. But inspired by the topic of "fractal antennas", he came up with the idea of combining them with the zapper's electric current as well. Fractals By using more than 1200 fractals arranged as Tesla coils, Hp Baklayan was able to develop an amplifier that covers all frequency ranges well.The results were more than impressive from the first attempt.
The F-SCAN4 offers the widest range of functions in our product family. With the colour screen, combined with an optimised operating concept, all possibilities for frequency application are available. With the optionally available ChipCard, programmes can be transferred to the F-SCAN COMPACT, for example. The F-SCAN3 is extremely easy to operate and is ideal for continuous use. Version The F-SCAN4 is fully equipped including USB connection and requires no further accessories for operation. For trained users who have mastered the EAP function, the EAP option is available and can be purchased separately. The built-in rechargeable battery enables mains-independent operation for 4-6 hours. Multifunction output, broadband output and PowerPort are available as outputs. The battery is charged via the USB cable supplied with a charger. Features Adjustable signal strength for sine and square wave OSCA - the new standard for current control DIRP for standard scans SUB SCAN mode for specific scans Advanced functions: up to 6 parameters can be assigned to a frequency: Waveform selectable (sine, square, full wave, smart) WOBBLE with adjustable wobble - range ENVELOPE (envelope function) TIMER - function Graphic colour screen with touch sensitive surface (Touch Screen) Frequency selection Complete memory management with large integrated memory Zoom adjustment for graphic DIRP analysis Universal output (multiplex) switchable: Sine for 0.01 Hz to 3 MHz , DC-OFFSET at multifunction output Sine 0.01 Hz to 15 MHz at wideband output Square wave for 0.01 Hz to 100 kHz with adjustable signal strength, FULL WAVE at multifunction output Square wave for 0.01 Hz to 100 kHz with adjustable signal strength, DC-OFFSET at the multifunction output SMART waveform for increased efficiency Separate broadband output for working in the megahertz range up to 15 MHz at 5Vpp (volt-peak-peak) PowerPort simultaneously available at own connection Creation of tables with 460 entries possible. Optionally available EAP function. Special features Output: The waveform can be selected as desired for each programmed frequency. There is no need for tedious plugging. Parallel use of the frequencies on the PowerPort or on the WIDE output is possible... Operating concept: By selecting one of the main menus, the functions and settings offered there can be easily recognised and, if necessary, changed by touch. The unit supports the preparation of common applications through factory presets and is thus quickly ready for use. Dimensions 205 mm x 140 mm x 30 mm. LCD: VGA 800 * 480 pixels. The SMART signal form combines the main wave with a high frequency and thus serves to increase efficiency. The use of the standard ChipCard serves for the convenient exchange of applications with F-SCAN COMPACT devices. The broadband output enables analysis and application in the megahertz range. The use of the ChipCard PLUS serves for the exchange of data between F-SCAN MOBILE and F-SCAN3 devices. OSCA the new standard OSCA is the abbreviation for "Output Signal Control Algorithm" and is used for constant current control according to a specially developed algorithm. This method was specially developed by TB-Electronics. The output signal is controlled and displayed in real time according to requirements. The very sensitive procedure measures currents in the microampere range and regulates the output voltage according to the set waveform and impedance. Electrical currents generated by frequency generators are load dependent (load is what is connected to the output). The "load" does not behave linearly, but constantly changes its characteristics depending on frequency, waveform and signal strength. Through OSCA and precise current control, higher efficiency of the application is achieved because the influence of the load is constantly compensated. OSCA is introduced for the first time with the F-SCAN4. Settings "OFF", "SENSITIVE", "STANDARD" and "HIGH" are possible. If OSCA="OFF" is selected, the current regulator is deactivated and a constant output voltage can be set as before. The combination of DIRP (scanning by feedback) and OSCA is unique and serves for further optimisation. Scope of delivery F SCAN4 F-SCAN4 USB charger FTB224 USB cable FTB223 Electrodes chrome steel 2 sets of adhesive electrodes FTB041 Connection cable FTB308 Finger probe FTB303 Instructions for use FSLIT106 Carrying case FTB333
The F SCAN MOBILE NT is the convenient link between the F-SCAN COMPACT and the F-SCAN3. The coloured screen with touch-sensitive surface replaces a keyboard. Settings are made and functions triggered by touching a symbol on the screen with the operating pen. Operation is easy to learn. Product features Fast response to operator commands DIRP analysis function with graphical display of results Multi-signal output for sine, square and smart curve Additional power output for driving lamps or magnets Adjustment control for square wave signal strength Memory with capacity for 100 data sets, each with up to 50 frequencies, the associated parameters and any DIRP analysis results obtained Special functions selectable: SENSITIVITY, WOBBLE, SWEEP Frequency range and step size adjustable for DIRP and SWEEP Frequency range of the sine signals 0.01 Hz to 3 MHz Frequency range of the square-wave signals 0.01 Hz to 100 kHz Timer adjustable per frequency Tables with up to 460 entries can be created. Special features Multi-signal output: All signal forms are output at one output of the unit. The unit automatically switches internally to the sine or square waveform depending on the frequency. Below 65'000Hz square wave, above sine wave. However, the user can manually assign one of the available waveforms to each frequency. The SMART signal form combines the main wave with a high frequency and thus serves to increase efficiency. The use of the standard ChipCard serves the convenient exchange of applications with F-SCAN COMPACT devices. The use of the ChipCard PLUS serves the exchange of data between F-SCAN MOBILE NT and F-SCAN3 devices. Screen and comfort By selecting one of the menus, the functions and settings offered there can be easily recognised and, if necessary, changed by touch. The unit supports the preparation of common applications through factory presets, making it quickly ready for use. Dimensions 138mm x 90mm x 27mm. Screen VGA 480 * 272 pixels. Scope of delivery F-SCAN MOBILE NT F-SCAN MOBILE NT USB charger FTB224 USB connection cable FTB223 Hand electrodes chrome steel FTB202A Connection cable FTB308 Two sets of adhesive electrodes FTB041 Finger probe FTB303 Instruction manual FSLIT102 Carrying case FTB325 FTB129 F-SCAN MOBILE NT
Hand electrodes INOX steel This steel has an anti-allergic effect.
Glove with silver fibre for Diamond Shield Zapper
Increase pulse frequency temporarily by charging Increase pulse frequency temporarily up to 20 Hz by charging *) with X - 100K pulse contingents *) Charging or upgrading is done by entering a 6-digit code number into the Parapulser® by the user.
Cable (2.5 m) with push-button adapter for fabric/area electrode (blue)